Photovoltaic PV Solar System Protection Fuse link

1 . Use 
  This series of fuses is suitable for lines with rated DC voltage up to 1000V and rated current up to 32A, with photovoltaic panels and storage
The battery is connected in series and connected in parallel to make short-circuit protection for the charging and       converter system; at the same time, the photovoltaic power station, the convergent inverter rectification system and the short
 Road fault breaking protection; and doing photovoltaic power system surge current and short circuit fault over voltage fast breaking protection, rated breaking
The capacity is 20KA, and our company is now doing related tests to improve the breaking capacity of the products. The products are in line with international power.
Working Committee Standard IEC60269-1/IEC60269-6

2 . Normal working conditions
  The upper limit of ambient air temperature does not exceed 90 °C; the lower limit of ambient air temperature is not lower than -40 °C; the altitude of the installation site is not exceeded
  After 2000m (if you want to exceed this 2000m, you need to specify the requirements, the company can manufacture according to customer requirements).

3. Use category
 "gPV" denotes a DC fuse for the full range breaking capability of the solar photovoltaic system for overcurrent protection.

4 . Structural features
 A variable-section melt made of pure silver sheet is encapsulated in a fusion tube made of high-strength porcelain, which is filled with chemically treated
 The high-purity quartz sand and special treatment chemicals are used as the arc extinguishing medium, and the two ends of the melt are firmly connected to the end cap by spot welding.

5. Main technical parameters

Solar PV Protection gPV Protection Fuse link
Rated voltage:1000VDC
Rated breaking capacity:20kA
Standard specification:IEC60269-6 Class:gPV

Solar PV Protection Fuse Holder for gPV Fufse link
Rated voltave:1000VDC
Standard specification: IEC60269-6

Product Pictures